ENG
23
Check if the connectors are properly connected and there is no problem with wiring and close up cover, and
fix it with screws.
1.4 NVR CABLING
Connect IP Camera following the diagrams.
Connect a VGA/HDMI cord (not included) from your monitor to the VGA/HDMI output on the rear panel of
your NVR.
Connect the USB mouse to the USB slot for mouse on the rear panel of the NVR.
Connect one end of the network cable (not included) to RJ-45 port on the rear panel of the NVR.
Connect another end of the network cable to your router, modem or other network connection device.
Plug NVR power supply to an open outlet.
In the following scheme some examples
