♦
If the machine function is still not satisfactory after
this procedure, contact an authorised service
workshop.
Storage
●
Clean the machine properly before storage, in
order to avoid hazardous substances. See “Dust
and fume hazard”
●
Pour approximately
1
⁄
2
oz (5 cl) of oil directly into
the air inlet nipple, connect the machine to the
compressed air supply and start it for a few
seconds.
●
Always store the machine in a dry place.
Disposal
A used machine must be treated and disposed of in
such a way that the greatest possible portion of the
material can be recycled and any negative influence
on the environment is kept as low as possible, and
in respect to local restrictions.
17
© 2010 Atlas Copco Construction Tools AB | No. 9800 0812 01c | 2010-01-01
Original instructions
Safety and operating instructions
TEX 05PE, 09PE, 12PE
