Technical data
Machine data
Air
Consumption
l/s
Impact freq.
Hz
Length
mm
Weight
kg
Shank
dimension
mm
Type
25
25
25
25.5
25.5
25.5
590
590
590
15.5
15.5
15.5
H22 x 82.5
H25 x 108
H25 x 108 US
TEX 140PS
25
25
25
25.5
25.5
25.5
590
590
590
19
19
19
H22 x 82.5
H25 x 108
H25 x 108 US
TEX 150PE
26
26
26
25
25
25
595
645
645
19
19.5
19.5
H25 x 108
H28 x 160/152
H 25 x 108 US
TEX 180PS
26
26
26
25
25
25
595
645
645
22.5
23
23
H25 x 108
H28 x 160/152
H 25 x 108 US
TEX 190PE
30
30
30
22
22
22
625
670
670
22
23.5
23.5
H25 x 108
H28 x 160/152
H32 x 160/152
TEX 220PS
30
30
30
22
22
22
625
670
670
25.5
27
27
H25 x 108
H28 x 160/152
H32 x 160/152
TEX 230PE
32
32
20.5
20.5
690
690
28
28
H28 x 160/152
H32 x 160/152
TEX 270PS
32
32
20.5
20.5
690
690
31.5
31.5
H28 x 160/152
H32 x 160/152
TEX 280PE
Noise and vibration declaration statement
Guaranteed sound power level
Lw
according to EN ISO 3744 in accordance with directive 2000/14/EC.
Sound pressure level
Lp
according to EN ISO 11203.
Vibration value
A
and uncertainty
B
determined according to EN ISO 20643. See table ”Noise and vibration
data” for the values of A, B, etc.
These declared values were obtained by laboratory type testing in accordance with the stated directive or
standards and are suitable for comparison with the declared values of other tools tested in accordance with
the same directive or standards. These declared values are not suitable for use in risk assessments and values
measured in individual work places may be higher. The actual exposure values and risk of harm experienced
by an individual user are unique and depend upon the way the user works, in what material the machine is
used, as well as upon the exposure time and the physical condition of the user, and the condition of the machine.
We, Atlas Copco Construction Tools AB, cannot be held liable for the consequences of using the declared
values, instead of values reflecting the actual exposure, in an individual risk assessment in a work place situation
over which we have no control.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed. An EU guide to managing
hand-arm vibration can be found at http://www.humanvibration.com/humanvibration/EU/VIBGUIDE.html
We recommend a programme of health surveillance to detect early symptoms which may relate to vibration
exposure, so that management procedures can be modified to help prevent future impairment.
Additional vibration information
This information is provided to assist in making rough estimates of the vibration value in the workplace.
© 2012 Atlas Copco Construction Tools AB | No. 9800 0683 82f | 2012-08-07
Original instructions
20
TEX 140PS, 150PE, 180PS, 190PE, 220PS, 230PE,
270PS, 280PE
Safety and operating instructions
