Technical data
Machine data
EHTMA
category
Flow
rate
l/m
(gal/min)
Operating
pressure
bar
(psi)
Accumulator
pressure
bar
(psi)
Impact
freq.
Hz
(blows/min)
Weight*
kg
(lb)
Shank
dimension
mm
(in)
Type
C
20-25
(4.4-5.5)
100-140
(1450-2031)
40
(580)
40-50
2400-3000
26
(57)
22 x 108
(
7
⁄
8
x 4
1
⁄
4
)
LHD 23 M
*Weight includes tail-hoses and moil point
Torque
Nm
(lbf/ft)
Revolutions
rpm
Maximum relief
valve setting
bar
(psi)
Maximum hydraulic
returnline pressure
bar
(psi)
Direction of rotation
Type
30
(22)
320-400
172
(2495)
15
(218)
Clockwise
LHD 23 M
30
(22)
320-400
172
(2495)
15
(218)
Counter clockwise
LHD 23 M
CC
Noise and vibration declaration statement
Guaranteed sound power level
Lw
according to EN ISO 3744 in accordance with directive 2000/14/EC.
Sound pressure level
Lp
according to EN ISO 11201, EN 500-4.
Vibration value determined according to EN 500-4. See table ”Noise and vibration data” for the values etc.
These declared values were obtained by laboratory type testing in accordance with the stated directive or
standards and are suitable for comparison with the declared values of other machines tested in accordance
with the same directive or standards. These declared values are not suitable for use in risk assessments and
values measured in individual work places may be higher. The actual exposure values and risk of harm
experienced by an individual user are unique and depend upon the way the user works, in what material the
machine is used, as well as upon the exposure time and the physical condition of the user, and the condition
of the machine.
We, Construction Tools EOOD, cannot be held liable for the consequences of using the declared values, instead
of values reflecting the actual exposure, in an individual risk assessment in a work place situation over which
we have no control.
This machine may cause hand-arm vibration syndrome if its use is not adequately managed. An EU guide to
managing hand-arm vibration can be found at http://www.humanvibration.com/humanvibration/EU/VIBGUIDE.html
We recommend a programme of health surveillance to detect early symptoms which may relate to vibration
exposure, so that management procedures can be modified to help prevent future impairment.
21
© 2015 Construction Tools EOOD | No. 3392 5013 01g | 2015-07-02
Original instructions
Safety and operating instructions
LHD 23 M
