Product Information
EN
W2910
4
© Atlas Copco Industrial Technique AB - 9834 4666 01
ServAid
ServAid is a portal that is continuously updated and contains Technical Information, such as:
■
Regulatory and Safety Information
■
Technical Data
■
Installation, Operation and Service Instructions
■
Spare Parts Lists
■
Accessories
■
Dimensional Drawings
https://servaid.atlascopco.com
For further Technical Information, please contact your local Atlas Copco representative.
Safety Data Sheets MSDS/SDS
The Safety Data Sheets describe the chemical products sold by Atlas Copco.
Please consult the Atlas Copco website for more information
Installation of Vibrating Tools
We recommend using a minimum length of 300 mm (12") of flexible hose for compressed air between a vi-
brating tool and the quick-action coupling.
Country of Origin
For the Country of Origin, please refer to the information on the product label.
Dimensional Drawings
Dimensional Drawings can be found either in the Dimensional Drawings Archive, or on ServAid.
http://webbox.atlascopco.com/webbox/dimdrw
or
https://servaid.atlascopco.com
Overview
Technical Product Data
Technical Product Data can be found on either ServAid, or the Atlas Copco website.
https://servaid.atlascopco.com
Service Overview
Overview
The table below shows the recommended service interval.
The service must only be done by an authorized workshop or qualified service technician.
Daily
Free speed check
Air lubrication
Weekly
Silencer inspection
Strainer inspection
Half yearly
Rating and markings inspection
Yearly or after 100000 tightenings
Overhaul
Threaded connections lubrication and tightening