Product Information
EN
W2415
4
© Atlas Copco Industrial Technique AB - 9839 0744 01
ServAid
ServAid is a portal that is continuously updated and contains Technical Information, such as:
■
Regulatory and Safety Information
■
Technical Data
■
Installation, Operation and Service Instructions
■
Spare Parts Lists
■
Accessories
■
Dimensional Drawings
https://servaid.atlascopco.com
For further Technical Information, please contact your local Atlas Copco representative.
Safety Data Sheets MSDS/SDS
The Safety Data Sheets describe the chemical products sold by Atlas Copco.
Please consult the Atlas Copco website for more information
Installation of Vibrating Tools
We recommend using a minimum length of 300 mm (12") of flexible hose for compressed air between a vi-
brating tool and the quick-action coupling.
Country of Origin
For the Country of Origin, please refer to the information on the product label.
Dimensional Drawings
Dimensional Drawings can be found either in the Dimensional Drawings Archive, or on ServAid.
http://webbox.atlascopco.com/webbox/dimdrw
or
https://servaid.atlascopco.com
Overview
Technical Product Data
Technical Product Data can be found on either ServAid, or the Atlas Copco website.
https://servaid.atlascopco.com
Service Overview
Overhaul and preventive maintenance
An overhaul should be done once per year or after a maximum of 100.000 tightening. More frequent pre-
ventive maintenance and overhaul are needed if the tool is used in heavy-duty operations. If the tool is not
working correctly take it out of service immediately for inspection.
At overhaul and maintenance:
■
clean all parts thoroughly
■
replace worn or defective parts
■
lubricate the threads and o-rings with grease before assembly
■
make sure that the threaded connections on the tool are tightened in accordance with the specifica-
tions on the exploded views
