User manual
2920 1456 03
27
Adding a command between two existing commands
1. Suppose the command 17:00 band 2 must be added to following list:
- 06:00
start
-
06:00 band 1
- 18:00
stop
2. The regulator does not allow to enter a new command which is situated before the last command
in the list timewise.
3. Scroll through the display until the command before which the new command must be entered is
followed by the horizontal arrow (in the example above: 18:00 stop) and press the key Mod.
Change this command to the new command (in the example above: 17:00 band 2) and press the
key Prog. Press the
↓
key, add the last command of the list (in the example above: 18:00 stop)
and press the key Prog.
14.5 To delete a command
1. Starting from the Main screen (see section 4.2):
-
press the key Menu (F1)
- press
the
↓
key until the option Modify Params is followed by a horizontal arrow
-
press the tabulator key (2) to activate the menu
2. Use
the
↓
key to scroll until the option Clock function is followed by a horizontal arrow. Press the
tabulator key (2); following screen appears:
Clock Function
Not activated
→
Menu Mod Del
F1 F2 F3
Deleting all commands
Press the key Del (F3) in the screen above. A question to confirm the deleting operation will appear.
Deleting all commands related to a specific day
Scroll through the display until the desired day is followed by a horizontal arrow. Press the key Del
(F3). A question to confirm the deleting operation will appear.
