User manual
2920 1456 03
32
5. Stop the compressor, switch off the voltage and carry out the service operations related to plans
A, B and C. See instruction book.
6. Switch on the voltage and scroll to the service screen shown in Fig. 16.2. Press the Rset button
(F3) to reset the timer. Confirm the question for resetting.
Notes
-
The Rset button only appears when the next Timer level is almost reached (from 400 running
hours before elapsing of the service plan interval).
-
After pressing the
↓
key in Fig. 16.1, the Life time hours are shown (i.e. the number of hours
elapsed since initial programming ex-factory). This counter is not taken into account.
17 Saved data menu
Function
To call up some compressor data saved by the regulator. These data are:
-
Last shut-down data
-
Last emergency stop data
Procedure
1. Starting from the Main screen (see section 4.2):
-
press the key Menu (F1)
- press
the
↓
key until the option Saved data is followed by a horizontal arrow
-
press the tabulator key (2) to activate the menu
2. The first option is shown (Last shutdown 1).
3. Press the tabulator key (2) to find out the date, time and other data reflecting the status of the
compressor at the last shut-down.
4. If desired, scroll through the other items.
