Example of running hours screen
<d01>
<hrs>
8000
• Stop the compressor, switch off the voltage and carry out the service actions. See section
Preventive maintenance schedule.
• The longer interval service actions must also include the shorter interval actions.
In the example above, carry out all service operations belonging to the 8000
running hours interval as well as those belonging to the 4000 running hours
interval.
• If using mineral oil instead of Atlas Copco Roto-injectfluid, the service timer has to
be decreased. See section Preventive maintenance schedule.
• After servicing, reset the service timer. See section
Calling up/resetting service timer.
3.9
Scrolling through all screens
Control panel
Control panel
Scroll keys (2 and 3) can be used to scroll through all screens. The screens are divided into
register screens measured data screens, digital input screens (numbered as <d.in>, <d.01>, ...),
parameter screens (numbered as <P.01>, <P.02>, ...) protections screens (numbered as <Pr.
01>,...) and test screens (numbered as <t.01>,...).
During scrolling, the numbers of the screens appear consecutively. For most screens, the unit of
measurement and the related pictograph are shown together with the screen number.
In the event of a warning or a shut-down, the corresponding pictograph is blinking on the main
screen.
Example
<hrs>
<d.01>
Instruction book
34
API451763
