Starting from the Main screen:
bar
6.6
• Press arrow key (2) until <P.06> is shown and then press enter key (1). The possible
settings are: <˚C> and <˚F>; the actually used unit is shown.
• Press enter key (1) (unit blinks) and use arrow keys (2 and 3) to select another unit of
temperature.
• Press enter key (1) to program the new unit and press reset key to return to the parameter
screen.
3.23 Calling up/modifying unit of pressure
Control panel
Starting from the Main screen:
bar
6.6
• Press arrow key (2) until <P.07> and the possible settings are shown <Mpa>, <psi>, and
<bar>, press enter key (1) and the actually used unit is shown.
• Press enter key (1) (unit starts blinking) and use arrow keys (2 and 3) to select another unit
of pressure.
• Press enter key (1) to program the new unit of pressure and press reset key to return to the
parameter screens.
3.24 Activating automatic restart after voltage failure
Description
This parameter, accessible in screen <P.08>, can only be modified after entering a code. Consult
Atlas Copco if this function should be activated.
Instruction book
46
API451763
