15
PAGE
Repair Instructions Nr.183.09/00
PHE 50 S
Mounting the
electric
components and
the Softgrip
1
Insert the service LED-module with RTR
chip (2) into the housing and fix it with the
screw (1).
2
Lead the connection cable (9) through the
Softgrip (8) and connect the switch (7)
with the RTR chip (2).
3
Fix the connection cable (9) with aid of the
cable clamp (5) and the screw (6).
4
Hang up the Softgrip (8) at the top of the
handle and press it down.
5
Mount the screw (A) to fix the Softgrip (9).
6
Fit the cover (3) on both sides and fix it
with the screws (4).
Fastening the
complete handle
and the motor
cover
1
Push the complete handle (4) over the
housing and fasten it with the screws (3)
and (5) as well as the distance sleeve (6).
2
Fix the motor cover (2) with two
screws (1).
Test Run
Electrical Test
Test run the machine and pay attention to noises.
Let the machine run-in.
Perform an electrical test on the machine (see chapter Electrical and Mechanical Test Instructions).
1
4
3
2
6
8
5
9
A
7
13
1
2
4
5
3
6
14
Summary of Contents for PHE 50 S
Page 1: ......
