4
PAGE
Repair Instructions Nr.183.09/00
PHE 50 S
Dismantling
the sleeve
1
Remove the locking ring (1) and the re-
taining ring (2).
2
Remove the six balls (4) with aid of a mag-
net from the drill spindle (3) and pull the
drill spindle (3) from the spindle sleeve (F).
3
Remove the anvil (7) from the drill spin-
dle (3) and remove the seals (8) from the
anvil (7).
Expel the distance sleeve (6) from the drill
spindle (3) with aid of a screwdriver (apply
it at the side through the groove).
Remove the O-ring (5) from the drill spin-
dle (3).
4
Remove the following parts from the spin-
dle sleeve (F):
ring (9),
rubber ring (A),
ring (B).
5
Remove the O-ring (C)
and the locking ring (D)
from the spindle sleeve (F),
and press off the ball bearing (E)
with aid of a service tool.
6
Remove the striker (U) from the spindle
sleeve (F) and remove the O-ring (V) from
the striker (U).
7
Detach the locking ring (T) from the spin-
dle sleeve (F).
Remove the following parts:
driver (S),
sleeve (M),
spring (L),
spring ring (K),
sleeve (I),
washer (H),
sleeve (G).
8
Remove the ring (R) from the driver (S).
9
Remove the following parts from the
sleeve (M):
locking ring (Q),
discs (N), (P),
sleeve (O).
2
1
6
5
4
7
9
B
C
A
D
8
F
H
G
O
N
M
L
K
I
S
V
U
T
3
P
R
E
Q
7
Summary of Contents for PHE 50 S
Page 1: ......
