QUICK SETUP
GUIDE
Setting up your hydraulic torque wrench for use is easy.
Please read the included user manual and safety instruc-
tion booklet for additional guidelines.
1
FOUR BASIC STEPS TO OPERATE YOUR RTX-30
4
Scan the code to see a brief overview video on how to use the document or go to
rapidtorc.com/torque_setup
RT-PTCen-RTX-30 Copyright Rapid-Torc®. Part of the Atlas Copco Group
Revised September 2014
Wear personal protec-
tive equipment, such as
eyeglasses and steel-toe
shoes.
1
2
3
SET PRESSURE
Make sure the hoses are
free of any defects. The
couplers are on pump
and the tool should be
securely connected.
Place tool on flat surface.
Turn pump on. Cycle the
tool. Press the “
ON
’ but-
ton on the remote, hold
until tool clicks. Release,
wait for the tool to click.
Repeat the cycle. Ensure
there is no leak.
4
Use the torque conver-
sion chart to set the psi
for the torque you need.
Press the remote’s “
ON
”
button and slowly turn
the pressure regulator
clockwise to reach the
right pressure.
CYCLE YOUR TOOL
CONNECT HOSES
WEAR PPE
2
3
