ATLAS North America Proprietary
Sea Scan ARC Scout MKII Operations Manual
1 of 1
Page: 9
Issue: 1.2.4
SCTM2-OPS
Operations Manual
Hardware Version: 0.0
Board Rev: PSU(-) Logic(-) RXTX(-)
0 Transducer: 1800kHz => Chirp UP 256uS 150kHz
1 Transducer: 900kHz => Chirp UP 256uS 150kHz
2 Transducer: 1800kHz => Chirp UP 256uS 150kHz
3 Transducer: 900kHz => Chirp UP 256uS 150kHz
Copyright 2016 Marine Sonic Technology
Initializing network hardware...done.
Initializing Sonar Hardware...done.
Fri Jan 1 00:00:02 2016 : PingRate(0Hz) Temp(21.0C) Power(12.0V, 0.500A, 6.0W) SDS(0 packets, 0KB, 0 FIFO)
Network Using IP(169.254.86.213) Subnet(255.255.0.0)
System Info
Serial Number: SCTM2F-46-2000
Build Date: Jul 21 2017 17:02:21
Software Version: 6.2.26
Hardware Version: 7.3
Board Rev: PSU(-) Logic(-) RXTX(-)
0 Transducer: 1800kHz => Chirp UP 256uS 150kHz
1 Transducer: 900kHz => Chirp UP 256uS 150kHz
2 Transducer: 1800kHz => Chirp UP 256uS 150kHz
3 Transducer: 900kHz => Chirp UP 256uS 150kHz
Copyright 2016 Marine Sonic Technology
5. After the Scout MkII system has successfully started, connect to the Scout MkII's web server. The default
IP address is
169.254.86.213
. The main web page will display the system's current state.
6. Navigate to the Application Settings page by selecting the link on the main page. Under the Scout MkII
Mode Setting, verify that the MkII Unit is configured as a Dual Frequency Master.
Note: Changing the application settings requires the settings to be saved and resetting the Scout MkII unit
for the changes to take affect.
The Scout MkII Dual Frequency Master is now ready to go. Continue with the Dual Frequency Slave
configuration procedure below.
