manualshive.com logo in svg

Atlas Equipment Atlas TC221, Assembly Manual

The Atlas Equipment Atlas TC221 is a high-quality, reliable product designed for efficient tire changing. Ensure seamless assembly of this exceptional equipment by referring to the detailed Assembly Manual, available for free download on our website. Get yours today at 88.208.23.73:8080 and start optimizing your tire changing experience.

Share
Download
background image

STEP 10:

 

 Install the stop bolt into the main column as shown. 

 
 
 
 
 
 
 
 
 
 
 
 

STEP 11:

 

Connect the 8mm coiled air line from the inflator gun to the elbow fitting on the rear 
of the changer. This is a push-lock fitting. Press the hose completely into the fitting. It 
will lock into place. 

 

 
 
 
 
 
 
 
 
 
 
 
STEP 12:

 

The assembly of your new TC221 tire changer is now complete. Double check your 
work. Make sure there are no loose bolts, screws or connections. Refer to the 
Owner’s Manual for operating instructions and safety warnings  before using your 
new tire changer. 

Summary of Contents for Atlas TC221






Reviews:

No comments

Related manuals for Atlas TC221

Fasep B331 User Manual preview
B331
Brand: Fasep Pages: 35

Brands by name

Popular brands

Load more brands