REV. 01 2012
25 / 35
CHAPTER 7
–
SETUP
On the measurement screen, press MENU/SAVE key to access the menu setup screen on which eight
configurations are available. Each configuration can be selected by turning and pressing SELECTOR.
On the left side of the screen:
¾
Multi-users
¾
Weight calibration
¾
Calibration of A/D gauge
¾
Calibration of B gauge
On the right side of the screen:
¾
General settings
¾
Self-diagnosis
¾
Multi-language settings
¾
System information
7.1 MULTI-USERS
x
Select and press SELECTOR to entry
the different user configuration.
x
Turn SELECTOR to change the different
users. The selected user is highlighted in
light red on the right side (ref. fig. 49).
x
Save the configuration or measurements by
pressing MENU/SAVE key for future
recalling.
x
Different users can have the different
configurations for recalling.
7.2 WEIGHT CALIBRATION
Make sure to set the exact dimensions of the wheel mounted. Entry of incorrect
data would mean that the machine is not correctly calibrated, therefore all
subsequent measurements will be incorrect until the new self-calibration is
performed with the correct dimensions.
Tips for weight calibration:
x
Select and press SELECTOR to select the reading units (gram or ounce).
x
Select and press SELECTOR to go back the previous screen.
x
Select and press SELECTOR to set the wheel dimensions.
Fig. 49
Summary of Contents for WB55
Page 1: ......
Page 35: ...REV 01 2012 35 35 CHAPTER 12 ELECTRIC DIAGRAM...
