AP-S15HRIP / AP-S15IP / AP-S158IP
Owner’s Manual
– 33 –
AtlasIED.com
TELEPHONE: (800) 876-3333
SUPPORT@ATLASIED.COM
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
Mechanical
Chassis Finish
Black
Product Dimensions (HxWxD)
AP-S158IP - 2.24" x 40.5" x 3.33" (57mm x 1029mm x 85mm)
AP-S15IP - 1.75" x 19" x 7.35" (45mm x 481mm x 187mm)
AP-S15HRIP - 1.75" x 8.83" x 8" (45mm x 224mm x 204mm) - Width with Rack Ears 10.4" (267mm) (Note 2)
Shipping Dimensions (HxWxD)
AP-S158IP - 6.25" x 42" x 5" (159mm x 1066mm x 127mm)
AP-S15IP - 5" x 18.7" x 10.6" (129mm x 475mm x 269mm)
AP-S15HRIP - 3.5" x 12.12" x 11.5" (90mm x 308mm x 290mm)
Unit Weight
AP-S158IP - 3.6 lbs. (1.63kg)
AP-S15IP - 5.5 lbs. (2.5kg)
AP-S15HRIP - 3.5 lbs. (1.6kg)
Shipping Weight
AP-S158IP - 6 lbs. (2.7kg)
AP-S15IP - 7.72 lbs. (3.5kg)
AP-S15HRIP - 5.5 lbs. (2.5kg)
Package Contents
Temperature / Humidity Probe, Fault Interface Probe, 2m 14-Gauge IED Power Cord, IEC Power Cord Retailer Bracket,
AP-LEDIP Display, Qty 1 Each, Rack Mount Kit for
1
/
2
Width & 19" Racks (Note 3)
Agency Approvals
Safety Listing
North America UL60950-1, CAN/CSA C22.2 No. 60950-1, UL1449
Note 1:
The AP-S15HRIP, AP-S15IP, and AP-S158IP meet the Californian law SB-327. Each unit is shipped with a unique password that can be changed
for accessing the device over the network. They are LAN (Local Area Network) devices and require a firewall or VPN for secure connection outside the
network operation. AtlasIED recommends consulting an IT specialist for best network security practices before installation.
Note 2:
The AP-S15HRIP fits most rack cabinets that are classified as half-width. There are no industry standards for these types of racks and rack
widths may vary between manufactures. AtlasIED recommends checking the distance between the rack rail opening before proceeding.
Note 3:
The AP-S15HRIP can be mounted into an AtlasIED wall mount half-width rack or a 19" rack. The AP-S15HRIP can be mounted with any
AtlasIED
1
/
2
RU products or mounted alone, but requires a rack mount kit.
Note:
Two AP-S15HRIP units cannot be mounted side by side.
