AP-S15HRIP / AP-S15IP / AP-S158IP
Owner’s Manual
– 5 –
AtlasIED.com
TELEPHONE: (800) 876-3333
SUPPORT@ATLASIED.COM
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
Introduction
Thank you for purchasing this AtlasIED Network IP Power Distribution system. This document is designed to provide a high-level overview of the
network IP power distribution system product family, including common features to all models. AtlasIED recommends visiting
www.atlasied.com/ip-enabled-power-distribution and downloading the AP-IP discovery software to a computer running the Windows
®
operating
system. Other related guides for the AtlasIED AP-IP Power Distribution systems can also be downloaded there.
The AP-IP power distribution systems are remote or locally controlled AC power distribution management systems with power conditioning, surge
protection and LAN monitoring. Each AP-IP features a local display and a web-based user interface (UI) that can monitor voltage, current, temperature
and humidity. Through the UI, alarms can be set to alert users when a fault condition has occurred via the network UI or fault contacts. Models
AP-S15IP and AP-S15HRIP include rear outlets that are programmable and can be scheduled to sequence On / Off individually or in groups on a
24-hour / 7-day schedule. Each AC outlet has a front panel LED status indicator that can also be used to manually turn the outlet On or Off. This feature
can be disabled via the UI for increased security. A front panel unswitched AC outlet is also included.
The AP-IP power distribution systems can be automatically identified when connected to a LAN using the AP-IP discovery software running on a
connected computer running Windows
®
. The AtlasIED model AP-LEDIP, LED display, is included to provide a visual reference of the voltage, current,
temperature and humidity data within the rack in real time. The AP-LEDIP can also be used to read the IP address of the unit, eliminating the need to
use the discovery software. The external temperature / humidity probe can be used to monitor rack climate conditions to activate a cooling system if
needed. Programable alarm settings are easily configured with fault logs and fault reporting via the UI. The unit or individual outlets can be tested or
monitored for active status via the Auto Ping Reset feature.
The AP-IP power distribution systems feature filtering for unwanted Radio Frequency Interference (RFI) that is commonly introduced into AC lines by
nearby radio transmitters or wireless products that commonly deteriorate video signals and that can be heard as static in audio signals.
A removable 2m, 14-gauge IEC power cord with a retainer bracket is supplied with each unit to allow the installer to use a longer or shorter power cord
length based on installation requirements (sold separately).
Key Features
• 15A Rack Mount Power Conditioner with LAN Network Monitoring & Control
• On-board IP Address Display
• IP Discovery PC Software
• Circuit Breaker Protection @ 15A
• Individual Outlet On / Off Manual Switch and LED Indicator (Enable / Disable)
• Removable 15A IEC Power Cord with Retainer Bracket
• AC Mains RFI Noise Filtering & Surge Protection
• Earth Ground Fault Connection Indicator
• Web User Interface
• DHCP or Static IP Addressable
• Voltage, Current, Temperature and Humidity Monitoring Capability
• Over Voltage, Current, Temperature and Humidity Alarm Setting
• Each Outlet Can be Individually Managed Remotely
• User Definable Names for Each Outlet
• User Definable Delay Time and Sequence
• Temperature Setting for AC Fan Activation
• Fault Log with Reporting
• Fault Reporting GPIO Port
• Password Protection
• Individual Outlet Auto Ping Reset
• User Definable 24 / 7 Schedules of Individual Outlets to Switch Devices On or Off
• 3-Meter Humidity / Temperature Probe
• AP-LEDIP Display Panel Shows Voltage, Current, Temperature, Humidity and IP Address
