– 5 –
AP-S15LA
Owner’s Manual
AtlasIED.com
TELEPHONE: (800) 876-3333
SUPPORT@ATLASIED.COM
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
Introduction
Thank you for purchasing the AtlasIED AP-S15LA AC Power Conditioner & Distribution Unit. The AP-S15LA has been designed to meet most installation
requirements for AC power distribution and equipment power protection.
The AP-S15LA features noise filtering for unwanted Radio Frequency Interference (RFI) that is commonly introduced into AC lines by nearby radio
transmitters or wireless products. EMI filters are incorporated to reduce noise from Electromagnetic Interference (EMI) from such items as electric
motors and switching power supplies. The benefit of these filters can be seen on video products or audibly by reducing static pops and external signal
interference.
The AP-S15LA is unique in that the integrator can select the power cord length that is required for the installation. A removable 12' IEC power cord
with a retainer bracket is supplied with the unit. A shorter or longer cord can be purchased separately if needed.
Unstable AC Mains voltage is one of the main reasons for equipment failure. The amount of energy that can be injected into the power system can be
immense with voltages reaching 6kV or amperage peaks of 3000A. These spikes are very fast and usually only last for a very short period of time. The
AP-S15LA’s circuitry is very fast and can suppress unwanted energy within a nanosecond response and sustain the suppression up to 2 milliseconds,
thus ensuring virtually trouble free protection. The front panel also features AC fault and ground status indicators providing quick, visual reassurance the
equipment is safe.
The AP-S15LA offers power management control, noise filtering, and spike / surge protection, making it the most compact, effective power
management protection system on the market today.