background image

– 6 –

IP100 / IP108 / IP116

Owner’s Manual

AtlasIED.com

TELEPHONE: (800) 876-3333

SUPPORT@ATLASIED.COM

1601 JACK MCKAY BLVD. 

ENNIS, TEXAS 75119 U.S.A.

Front Panel

1. 2-Line LCD

This display will illuminate when the unit is powered on, and may be used to view and change certain properties of the announcement controller.

2. Navigation Buttons

These buttons are used to navigate through the options on the LCD display.

Rear Panel

1. Power

This connector is used to connect the unit to either the included single IED1112PSD power supply module or the IED1112PS rack-mount power supply. 
This 12VDC jack accepts a 2-pin Phoenix plug with 3.81mm spacing.

2. VGA Monitor Out

This analog video output is used to attach a monitor to the unit. It supports resolutions up to a maximum of 2048 x 1536 (QXGA) at 75Hz refresh rate.

3. HDMI Monitor Out

This digital video output (HDMI) is used to attach an external monitor that supports digital video. It supports a maximum resolution of 1600 x 1200 
(UXGA)

4. USB Ports (4)

Use these four USB 2.0 compliant ports to connect a keyboard and mouse to the unit. The remaining ports can be used to attach an external storage 
device for system backup or file transfers.

1

2

1

6

10

8

3

7

4

9

2

5

Summary of Contents for IP100

















Reviews: