Owner’s Manual
TSD-DA13
1x3 Distribution Amplifier
AtlasIED.com
– 3 –
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Front Panel Description
1.
Input Level Control
- Adjusts the gain of the source audio signal that is applied to the DA13
circuitry. Turn clockwise to increase the signal level and counter-clockwise to decrease it.
Note:
The Input Level Control knob can be removed and replaced with a supplied security cover to
prevent unauthorized adjustment.
2.
Output Level Controls
- Adjust the level of each of the three outputs using these controls. Turn
clockwise to increase the signal level and counter-clockwise to decrease it.
Note:
The output level
control knobs can be removed and replaced with supplied security covers to prevent unauthorized
adjustment.
3.
Power LED
- Illuminates BLUE when 24VDC power is present.
4.
Input Peak LED
- Illuminates Red when the input signal reaches 3dBV below when signal clipping
will occur. Occasional flashing is normal but if this indicator is continuously On, then reduce the
input level using the input level control on the front panel.
5.
Signal LED
- Illuminates Green when the input signal strength reaches 25mV to verify a signal
path.
3
5
4
1
2
