– 6 –
TSD-DCPDV
Owner’s Manual
AtlasIED.com
TELEPHONE: (800) 876-3333
SUPPORT@ATLASIED.COM
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
Mounting
Listed below are the ways to mount the TSD and the optional accessories that can be
purchased.
1. Velcro™ - Each unit includes two 2" x 2" pieces of industrial-grade Velcro™ with adhesive
backing to adhere to any flat surface. Clean all surfaces before applying the adhesive side of
the Velcro™.
2. Multi Mount Plate - Each TSD includes a versatile multi-position mounting plate. This
plate allows the TSD to be mounted to any surface; but is ideal for use with rear rack rails
or side rack hat channels. Use the included M3 x 4mm screws to install the plate on the
TSD.
Note:
Only use the included M3 x 4mm screws as other screws may be too long and
will cause internal damage to the TSD. The multi-position mounting plate is a new addition
being included with TSDs. If the TSD being used did not include the mounting plate, contact
AtlasIED customer service at 1-800-876-3333.
(M3 x 4mm)
(M3 x 4mm)
