9
PRE-STRETCH
Pulls string, release string and re-pulls to the tension setting.
Presses the key of the “PRE-STRETCH” to set up the function of “PRE-STRETCH”
and presses it again to cancel the “PRE-STRETCH” function. The indicator light of
the “PRE-STRETCH” lights up to indicate the “PRE-STRETCH” is set.
TENSION CALIBRATION
Turns the machine on while pressing the “TENSION CALIBRATION” button and
CAL appears on the display along with a tension such as 5 KG and then the indicator
light of the “TENSION CALIBRATION” lights up to indicate the “TENSION
CALIBRATION” is set.
MUTE/MODE/MEMORY
MUTE function :
Presses “MUTE/MODE/MEMORY” to cancel the beep sound. Sets up the beep sound
by pressing “MUTE/MODE/MEMORY” key again.
MODE function :
For troubleshooting purpose and factory setting only.
MEMORY function :
Stores the new calibrated tension during tension calibration.
POWERING
The main power switch is located on the right of the machine next to the receptacle
for the power cord. A 2 amp fuse is located in the power cord receptacle.
Voltage between 100V and 110V (50 Hz to 60 Hz) is acceptable. A grounded outlet
must be used.