Vehicle Diagnosis And Adjustment
42
Atlas Cyclops
Should you be willing to repeat the operation once the program has already
entered a following phase, you can go back to this page by pressing F1, and
repeat the above procedure. Once the out-of-center procedure has been
completed, the program will automatically go to the next phase.
9.6
Measurement Preliminary Operations
After having carried out the out-of-center procedure as explained in part 9.5, it
is necessary to prepare the vehicle for measurement operations. The following
screen will be displayed:
Figu r e 3 1
1. Release front plates, and any rear platform
2. Brake wheels with hand brake, then lock brake pedal with the pedal depressor
tool (this operation is necessary when carrying out a steering for kingpin
correct calculation).
3. Settle vehicle front and rear ends (necessary only if vehicle had been
previously lifted and the suspensions unloaded).
Settle vehicle
front and
rear ends
Release front
plates, and any
rear platform
Lock brake
pedal using the
special tool