Figure 5
Figure 4
Figure 6
4
Connect the black fan wire to the hole on
the terminal block marked "LI".
Connect the brown fan wire to the hole on
the terminal block marked "L".
Connect the blue fan wire to the hole on
the terminal block marked "N".
Connect the green/ground fan wire to the
hole on the terminal block marked " ".
Tighten the screws on the terminal block with
screw driver to avoid the wires loose. (Fig. 4
and 5)
5. Be sure to snap together the male and
female plugs. (Fig. 4)
6. Push canopy down goose neck toward
wall until the canopy lays flat against the wall
surface, covering the hanger bracket. Tighten
set screws in canopy. (Fig. 6)
SUPPLY CIRCUIT
OUTLET
BOX
Neutral
Brown/Fan
Black/OSC
Hot/Live
Ground
Blue/Neutral
Yellow/Green
Black/Hot
Brown/Hot
Canopy
Terminal block
Screw driver
Green/
Ground
Blue
(household)
Black
(household)
Brown
(household)
Female plug
Male plug
(from fan)
Set screws
Hot/Live
