Loeki and Bello User Guide
4. Operation
No part of this User Guide may be reproduced, stored in a retrieval system, or published, in any form or by any means, electronic,
mechanical, photocopying, recording or otherwise, without the prior written permission of Atlas Revalidatie Techniek BV.
© 2008 Atlas Revalidatie Techniek B.V.
7
4
4
.
.
O
O
p
p
e
e
r
r
a
a
t
t
i
i
o
o
n
n
A distinction is made between standard settings and daily adjustments to the highchair. Changes to
the standard settings always require tools. The daily settings are indicated by the clamps and the
adjusting knobs (see illustration 2).
4.1
Daily adjustments
There are a few settings that are adjusted as part of the daily use of the highchair. These
adjustments are required to lift the child in and out of the chair or to be able to change the seating
position of the child somewhat when needed. As shown in illustration 2, these daily adjustments do
not require any tools.
4.1.1
The brakes
•
The brakes on the Atlas highchairs can be engaged and released by using the black lip attached
to each one of the four wheels.
•
Engaging the brake:
Push the lip down with the front part of the shoe until it stays down (see illustration 3A).
•
Releasing the brake:
Push up the lip with the front part of the shoe (see illustration 3B).
Illustration 2:
Above: adjusting knob.
Right:
clamp.
Attention:
Adopt a comfortable posture while loosening or tightening the adjusting knobs. Once the
adjustments have been made, be sure to retighten the adjusting knobs. Always turn the clamps to
the inside so that clothes cannot catch on them. To do this press the button at the top and set the
clamp to the desired position without loosening the adjusting screw.
