Operation
22
TC255
Operation
Do not use the machine until you have read and understood
the entire manual and the warning provided.
Before carrying out any operation, make sure to defl ate the
tire and take off all the wheel balancing weights.
5.1
Clamping The Wheel
• Check to make sure that the tire is defl ated and all balancing weights are
taken off.
• Place the wheel onto the wheel positioner. Make sure the worker area is
free of any object.
• Raise the wheel positioner with the wheel to the full height.
• Slip the wheel onto the top of spindle fl ange with help of rollers.
• Lower the wheel positioner so that the wheel can be positioned on the
center of the spindle fl ange and in the meantime align the driving pin with
one of the wheel lug holes so that the pin goes into the lug hole.
• Select the cone that best fi ts the center hole in the wheels. Slide the cone
onto the center post with the small end towards the central hole of the rim.
