background image

Owner’s Manual

TSD-PA10VG 

Mono Commercial Power Amplifier

 

                                                     AtlasSound.com

 – 5 –

Specifications are subject to change without notice.

1601 Jack McKay Blvd. • Ennis, Texas 75119  U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

Knob and Security Cover

All front panel level controls feature a removable knob that can be replaced with included security

covers to prevent potentiometer damage or unwanted changes.

•  Knob Installation - Turn the potentiometer shaft fully counter-clockwise. Align the knob indicator    

  to the lowest setting on the panel and the potentiometer shaft slot. Carefully press the knob onto  

  the potentiometer shaft. Do not force or damage may occur to the potentiometer. 

•  Security Cover Installation - Remove the knob from the panel and insert the cover. Do not force or 

  damage may occur to the potentiometer. Small pliers may be required to remove the knobs.

Mounting

There are three ways to securely mount this TSD:

1. Velcro™ -  Each unit includes industrial-grade Velcro™ with adhesive backing to adhere to any  

  flat surface.

2.  Brackets - Each unit includes two mounting brackets to secure to a cabinet or wall.

3.  Rack Mount Panel - The optional TSD-RMK rack mount panel supports up to four TSDs in a

  1RU space.

Summary of Contents for TSD-PA10VG









Reviews: