REV. 03
4 / 22
CHAPTER 1 – INTRODUCTION
1.1 INTRODUCTION
Thank you for purchasing a product from the line of wheel balancer. The machine has been
manufactured in accordance with the very best quality principles. Follow the simple instructions
provided in this manual to ensure the correct operation and long life of the machine. Read the entire
manual thoroughly and make sure you understand it.
1.2 MACHINE IDENTIFICATION DATA
A complete description of the “Wheel balancer model” and the “Serial number” will make it easier for
our technical assistance to provide service and will facilitate delivery of any required spare parts. For
clarity and convenience, we have inserted the data of your machine in the box below. If there is any
discrepancy between the data provided in this manual and that shown on the name plate fixed to the
wheel balancer, the latter should be taken as correct.
1.3 MANUAL KEEPING
For a proper use of this manual, the following is recommended:
x
Keep the manual near the lift, in an easily accessible place.
x
Keep the manual in an area protected from the damp.
x
Use this manual properly without damaging it.
x
Any use of the machine made by operators who are not familiar with the instructions and
procedures contained herein shall be forbidden.
This manual is an integral part of the manual: it shall be given to the new owner if and when the
machine is resold.
The illustrations have been made out of prototypes pictures. It is therefore
possible that some parts or components of standard production differ from those
represented in the pictures.
TO THE READER
Every effort has been made to ensure that the information contained in this manual is correct, complete
and up-to date. The manufacturer is not liable for any mistakes made when drawing up this manual and
reserves the right to make any changes due the development of the product, at any time
LOGO
Type:
Volt
Amp Kw
Ph Hz
Year of manufacturing:
Summary of Contents for WB11
Page 1: ......
