2/4
AtlasSound.com
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2011
Atlas
Sound
L.P
.
All
rights
reserved.
Atlas
Sound
is
a
trademark
of
Atlas
Sound
L.P
.
All
other
trademarks
are
the
property
of
their
respective
owners.
All
specs
are
subject
to
change
without
notice.
A
TS003980
RevA
1/11
ZCM-V2
Zone Controller Pro Install Sheet
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
GPI Interface
GPI Inputs:
GPI Inputs 1 and 2 are used to trigger events in the ControlKom and Informacast software packages. Refer to software manuals for functionality.
GPI Outputs:
Via the InformaCastSpeaker.cfg file the GPIO’s can be configured for special operations.
To activate the GPI Out closure when audio is playing, use a tag like this:
<GPIO while_audio_output="1x" />
The first digit controls GPI Out 1; the second controls GPI Out 2.
"1" means to close it when audio is playing, open it otherwise.
"0" means to open it when audio is playing, close it otherwise.
"x" means the that GPI Out is not affected by audio playing.
Example:
<InformaCastSpeakerConfiguration>
<Servers registration-interval="5">
<InformaCast url="http://server_ip_address:8081/InformaCast/admin?cmd=spkr"/>
</Servers>
<Firmware file="ipsl_EL020b17.bin"/>
<PriorityBootFirmware file="ipsl_EL020b17.bin"/>
<PriorityFirmware file="ipse_E292b17.bin"/>
<FPGAFirmware file="fpga1074.bin"/>
<GPIO while_audio_output="1x" />
</InformaCastSpeakerConfiguration>
Pin Out for GPI I/O
"J3" shows the Pin out for the GPI I/O:
1
Input 1 +
2
Input 1 –
3
Input 2 +
4
Input 2 –
5
Output 1+
6
Output 1-
7
Output 2+
8
Output 2 –
9
+ 3.3VDC
10
GND
