Operation Controls and Functions
Remote controls and Functions
1. Power: Power ON/Off.
2. Video setting adjustments for picture contrast, bright,
color and sharpness.
3. V-Reset: Press the button to reset picture adjustment 2
to factory default vaule.
4. NTSC/PAL: Press the button to select NTSC or PAL
as video output.
5. Color bar pattern ON/Off:
Press the button to show color bar pattern on the
screen. Press again to close color bar.
6. Image freeze ON/Off: Press the button to freeze/
unfreeze an image.
7. Output format: Press the button to select your desired
output fromat.
Press repeatedly to toggle through CV/SV
g
YCbCr
8. Under/Over Scan: Press the button to choose a
underscan image or overscan image.
9. 9-blocks selection(Zoom): Under zoom mode
press one of the buttons to select its corresponding
sub-area which is 1/9 of the full screen.
10. Zoom ON/Off: Press the button to zoom in an picture,
press again to zoom out.
11. Horizontal/Vertical adjust knob:
- Adjust the size or position of a image when it is under Zoom, Pan/Position,
or Size/EXP mode.
- Adjust setting value of picture adjustment in 2 .
12. Default: Press the button to revert the following parameters to factory preset value:
- Zoom
- Position
- Size
- Picture adjust
13. Pos/Pan: When a picture is in underscan mode, press the button to do position
adjustment. When a picture is in overscan mode,press the button to do
pan adjustment.
14. System reset: Press the button to revert all system parameters back to factory
preset value.
The system parameters are default as follows:
- Overscan
- NTSC output
- Full aspect
- Video settings reset, position/ pan/size /expand reset.
- CV/SV output
15. Size/EXP: When a picture is in underscan mode, press the button to do size
adjustment. When a picture is in overscan mode, press the button to do
expand adjustment.
16. Aspect: Press the button to switch between full, Pan & Scan or letterbox.
3
6
7
8
1
2
9
10
3
16
4
5
11
12
13
14
15
OUTPUT
*A
