AT-HDVS-150-RX
21
Menu System
Setting
Description
Display
HDCP
Provides control over the transmission of HDCP content for the HDMI IN
port on the transmitter (TX). The following options are available:
• Compliant
- Forces detection of HDCP-compliant sink devices.
If the sink device is not HDCP-compliant, then no content will be
transmitted.
• Noncompliant
- Suppresses detection of HDCP-compliant sink
devices, allowing non-HDCP content to be transmitted.
• Auto
- Automatically detects the presence of HDCP-compliant
sink devices. If an HDCP-compliant display is detected, then
HDCP content will be sent. Otherwise, non-HDCP content will
be sent.
Mirror-V
Vertically flips the output signal. The default setting is Off. The following
options are available:
• On
- Vertically flips the output image.
•
Off
- The output image is unaltered.
ASP Background
Changes the color of background bars when changing the aspect ratio of
the output image. The default color is Black. The following options are
available:
• Black
• Grey
Display Mode
Controls how the display behaves when connected to a source device.
• DispSW AVSW
- Display switches on/off, source audio/video
signal switches on/off.
• DispSW AVon
- Display switches on/off, source audio/video
signal always on.
• Always ON
- Display is always on, source audio/video signal
always on.
• AV SW
- Display is always on, source audio/video signal
switches on/off.
Disp. Key Lock
Allows the
MENU
button to be locked, preventing accidental operation
when the product is in use. Define the time interval using the Warm Up
Timer option, below. The following options are available:
• On
- Enables the feature.
•
Off
- Disables the feature.
Auto Disp. On
Sends the command to power-on the display when an A/V signal is
detected. The following options are available:
• On
- Enables the feature.
•
Off
- Disables the feature.
Auto Disp. Off
Sends the command to power-off the display when an A/V signal is no
longer present. The following options are available:
• On
- Enables the feature.
•
Off
- Disables the feature.
NOTE:
Some source devices will enable HDCP if an HDCP-
compliant display (sink) is detected. However, there may be
applications where sending HDCP content is not desired.
This feature does
not
provide decryption of HDCP content to
non-HDCP sink devices
