Atlona AT-LINE-PRO3, User Manual

1. STANDBY: Press the button once to en

-

ter standby mode; press again to power 

the unit on

2. INFO: Press the button to view the input 

and output message.

3. INPUT SOURCE: Press any of the button 

to directly select desired Input source.

4. UP/DOWN: Select between the input 

sources one by one.

5. UP/DOWN/LEFT/RIGHT: Press 

UP/DOWN button to move the                             

highlighter bar to the desired parameter 

in OSD menu. Press LEFT/RIGHT to 

increase/decrease the setting value of a 

selected parameter.

6. MENU: Press the button to activate an 

on screen menu page.

7. PC BYPASS: Press the button to enter 

bypass mode.

8. 720P: Press the button to directly output 

720P.

9. 1080P: Press the button to directly output 

1080P.

SYSTEM CODE : 00FF

1) Connect the inputs of the AT-LINE-PRO3 into desired sources (such as AppleTV, Blu-Ray Player, 

PS3, Set Top Box etc) 

2) Connect the AT-LINE-PRO3 Outputs to desired HD Displays (such as LCD, DLP or any other stan-

dard). 

3) Power on the desired input source you want to show. 

4) Connect the 5V DC power supply into the unit and turn on the display you want to watch.

5) Use IR remote or manually roll the Knob on the front panel to choose desired input source. 

NOTE: VGA and AV2 share the same Stereo audio input, S-video and YPBPR2 share the same Stereo audio.     

        Atlona’s AT-LINE-PRO3 accepts AV, SV, VGA, YPBPR, DVI-I and HDMI inputs. 

4                                                   

IR REMOTE

OPERATION

0x14

0x19 0x1B 0x11

0x15

0x08

0x17

0x50

0x5E 0x06

0x07

0x44

0x18

0x0F 0x51

0x1A

0x1E

0x02

0x55 0x48

0x12 0x59

0x46