AT-VCC-RELAY-KIT
6
Installation Guide
19 Select the Add button next to the VCC. A new pop up will appear.
20 Select the
VCC Relay/Sensor
from the drop down menu.
21 Press the
ADD VCC TO ROOM
button. A VCC tile will appear in the room.
The VCC is now ready to use. Refer to the Macros, Event Macros, and Room Triggers section of
the Velocity manual for setting up relay control.
•
Select
Relay/Sensor
from the drop down menu.
•
Type the VCC’s IP into a web browser to open the Velocity Command Converter
Configuration.
•
Select
Velocity Control Cable
from the two options.
NOTE:
If for some reason the unit isn’t syncing or the settings aren’t being set, they
can be set up manually through the VCC webGUI.
•
Select the Relay/Sensor configurations.
NOTE:
Ensure to select the Relay type that matches how the connector was pinned.
Refer to
sections if unsure how to set up the connector.
