5. Configuration & Operation
Picture Adjust- When it is selected the following adjust parameters will appear:
Contrast
Bright
Color
Reset
Exit
070
130
070
The adjustment range and factory preset value are as follows:
Contrast
Bright
Color
Range
Default
0~255
0~255
0~255
047
102
064
Use +,- and MENU/Enter to adjust the value of your selected parameter.
Select reset to reset all adjustment back to the factory preset value.
5.2 Manual and Adjustments
HV adjust- When it is selected the following sub-menu appears.
H-position
V-position
184
32
Use +,- to adjust the best horizontal and vertical position of the picture.
OSD adjust-When it is selected, you can adjust the Horizontal and Vertical
position of the OSD menu.
System information- When it is selected, it shows the current software version
and the input/output resolution and their vertical refresh
rate on the screen.
Auto adjust- When it is selected the CP-253 will automatically adjust all the
parameter to the factory preset value.
Exit- Select to exit from the current page.
Notes:
* The default output resolution of the CP-253 is XGA@60Hz.
* The unit has non-volatile memory and memorizes all your settings before
power off and recalls those settings on next power on.
* At any time, pr and - buttons simultaneously will reset the output
resolution to XGA@60Hz, and other settings back to factory default values.
5
