Installation Guide
AT-OMNI-121
2
TM
O
MNI
S
TREAM
LINK
PWR
AT-OMNI-121
ETHERNET
RS-232
AUDIO
OUT
IN
L
R
DC 48V
RX TX
1
HDMI OUT
Panel Descriptions
1 PWR
This LED indicator is green when the unit is
powered.
2 LINK
These LED indicators show the active input
status.
3 REBOOT
Use a pointed object to press this recessed
button and reboot the unit.
4 HDMI OUT
Connect an HDMI cable from this port to an
HD display.
5 ETHERNET
Connect an Ethernet cable from this port to
the Local Area Network (LAN).
6 RS-232
Use the included captive screw connector
to connect an RS-232 device to this port.
7 AUDIO
Connect the included push spring
connectors to embed audio on the output
stream and/or connect to an audio output
device. Refer to
Audio
on page 3 for more
information.
8 DC 48V
Connect the optional 48V DC power supply
to this power receptacle. This power supply
is available, separately, and is required for
embedding and de-embedding of analog
audio.
1
2
3
5
7
8
4
6
