Installation Guide
2
1
2
LINK
PWR
ID
AT-OMNI-122
Eth 1
Eth 2
RS-232
AUDIO
Out
In
L
1
R
L
2
R
DC 48V
RX TX
HDMI OUT
1
PWR
This LED indicator is green when the unit
is powered.
2
LINK 1 / LINK 2
These LED indicators show the active
input status.
3
ID
Press this button to identify the unit within
the AMS software.
4
REBOOT
Use a pointed object to press this
recessed button and reboot the unit.
5
HDMI OUT
Connect HDMI cables from these ports to
an HD display.
6
Eth 1 / Eth 2
Connect Ethernet cables from these ports
to the Local Area Network (LAN).
7
RS-232
Use the included Phoenix terminal block
to connect up to two RS-232 devices to
this port.
8
AUDIO 1 / AUDIO 2
Connect the included Phoenix terminal
blocks to embed audio on the output
stream and/or connect to an audio output
device.
9
DC 48V
Connect the optional 48V DC power
supply to this power receptacle. This
power supply is available, separately.
Panel Descriptions
1
2
3
4
7
6
8
5
9
