AT-OMNI-111 / AT-OMNI-112
18
Configuration
1. Select the desired encoder under the
Domain View
pane, within AMS.
2.
Under the
Configuration Details
tab, click the
Encoding
tab.
3. Click the
Input
drop-down list and select the input for the desired source.
4.
Enter the desired bit rate in the
Bit Rate
field. Specifying lower bit rates will reduce video quality. This value is in
megabits-per-second (Mbps).
5.
Select the bit depth from the
Bit Depth
drop-down list.
Input Selection
hdmi_input1 = HDMI IN 1
hdmi_input2 = HDMI IN 2
