AT-OMNI-111 / AT-OMNI-112
27
The Virtual Matrix
The term
physical interface
, refers to the Ethernet cable that is connected to each encoder/decoder. Once a
cross
connection
is created, decoding process will automatically begin. To stop the decoding process, refer to
for more information.
1. Move the mouse cursor over any two
physical interfaces
. When a valid selection is made, the cursor will turn
from an arrow to a hand.
2.
Left-click to display the
Create cross Connection
dialog. The current sources, as well as the assigned sessions,
will be displayed. The default streaming mode is set to
multicast
. Note that only
sessions
assigned to the
physical interface
will appear in the drop-down lists.
To select a different
video session
, click the
Video Session
drop-down list and select a different session.
The same operation can be performed for the
Audio Session
and
Data Session
, using the drop-down lists.
The default streaming mode is set to
multicast
.
Creating Cross Connections
