AT-OMNI-111 / AT-OMNI-112
28
The Virtual Matrix
3. Click the
Create
button to create the cross connection.
4.
The following message box will be displayed. If the operation is successful, the dialog will state that a cross
connections has been successfully created. The IP address in the message box is the decoder IP address.
5. Click the
Close
button to dismiss the message box.
6.
Once the
cross connection
is created, a circular symbol will appear at the point where the
physical interfaces
are
connected.
Cross Connection
Decoder IP address
NOTE:
The
cross connection
represents a “node” in which two
physical interfaces
are connected.
However, the a
cross connection
does not neccessarily indicate the presence of a video/audio/data
stream passing from the encoder to the decoder; it merely represents a logical connection between
two
physical interfaces
.