AT-OMNI-111 / AT-OMNI-112
29
The Virtual Matrix
Removing Cross Connections
Deleting a
cross connection
terminates the connection between two physical interfaces. Once deleted, the currently
assigned video/audio stream will no longer be able to pass between the encoder and decoder.
1. Right-click on the desired
cross connection
.
Unless the desired cross connection is known, it will be necessary to right-click on the cross connection to
display the available options. If
Start Decoding
is an option, then another cross connection must be selected.
2. Click
Remove Cross Connection
to delete the
cross connection
.
3.
AMS will display a prompt message to confirm the operation. Click the
OK
button to delete the cross
connection. Click the
Cancel
button to return to the
Virtual Matix
tab without deleting the cross connection.
4. If the
OK
button is clicked, the following message box will be displayed. Click the
Close
button to dismiss the
message box.
