AT-OMNI-121 / AT-OMNI-122
23
LED Indicators
The following table provides a listing of front-panel LED indicators and their status:
LED
Description
PWR
Off
•
If using a PoE switch, make sure that the port on the switch that is
connected to the decoder, has PoE enabled. When the decoder is
powered using PoE, the
PWR
indicator will be green.
•
Check the Ethernet cable for possible damage or loose connections.
•
Connect the optional 48V DC power supply (available from atlona.
com) to the decoder. When using an external power supply, the
PWR
indicator will be red.
Red
•
The decoder is booting.
Green
•
The decoder is ready.
LINK 1 / 2
Red
•
The optional 48V DC power supply is connected, but no Ethernet
cables are connected between the switch and the
ETHERNET
port(s).
•
Check the Ethernet cable for possible damage or loose connections.
Green
•
Link integrity is good between the decoder and the network.
Basic Operation