AT-OMNI-121 / AT-OMNI-122
43
IR Control
Configuring the Decoder Serial Port
1.
Select the desired decoder within the
AMS Device List
window and make note of the decoder IP address.
2.
Enter the required login credentials. The default login is:
Username: admin
Password: Atlona
3.
Click the
Login
button, then click
IP Input
in the top menu bar.
4.
Scroll down to the
Input 5
window group.
5. Enable
Input 5
by clicking the
Enable
toggle switch. When enabled, this toggle switch will be orange.
6.
Enter the port in the
Port
field. This port number must be the same port used by the encoder, and is the input of
the decoder that will receive IR data.
NOTE:
Input 5
is dedicated to IR. Therefore, this input
must
be used in order for end-to-end IR to
function properly.
Enable
SAVE button
IMPORTANT:
Do not change the contents of the
Multicast Address
field. Unicast mode uses the
IP address of the decoder for communication. Therefore, only the port number is required.
7.
Click the
SAVE
button to commit changes.
