Atmel Digital Temperature Sensors Evaluation Kit
Atmel AT30TK175 Starter Kit
Hardware User Guide
Features
•
Four digital temperature sensor devices:
•
Atmel
®
AT30TSE002B
•
Atmel AT30TS75
•
Atmel AT30TS750
•
Atmel AT30TSE758
•
Four event LEDs
•
Four alarm status LEDs:
•
Critical, high, low, and normal
•
Software switchable V
CC
: 3.3V, 5.0V, and OFF
•
Power LED
Contents
•
One Atmel AT30TK175 adapter board
•
One Atmel AT88Microbase AVR
®
base module
•
6-inch USB cable
•
18-inch extension cable
Introduction
This starter kit utilizes the Atmel AT30TK175 adapter board to allow users to experiment and develop with the Atmel
AT30TSE002B, AT30TS75, AT30TS750, and AT30TSE758 digital temperature sensors.
The AT30TK175 daughterboard interfaces with the Atmel AT88Microbase board (included in the kit) to provide communication to a
PC via a USB interface, allowing designers to learn and experiment with the temperature sensor demonstration utility. In addition,
this kit supports a modular approach, enabling the AT30TK175 daughterboard to connect directly to an Atmel STK
®
series AVR
development platform to easily add temperature monitoring capabilities to applications.
Figure 1.
Atmel AT30TK175 adapter board
Power LED
Digital temperature sensor and the
associated EVENT/ALERT LED
Alarm status LEDs
8745A–DTS–5/11
