Atmel AVR2103: RF4CE Remote Control
Evaluation Kit - Quick Start Guide
Features
This application note briefly describes how to set up and run the pre-flashed
performance test application included with the Atmel
®
RF4CE Remote Control
Evaluation Kit.
The latest RF4CE dedicated applications can be downloaded from
and flashed to the kit hardware by using the serial bootloader functionality of the
pre-flashed application.
1 Kit contents
2x Atmel RCB128RFA1 Radio Controller Board (RCB)
1x Atmel RCB Sensor Terminal Board (STB)
1x Atmel RCB Key Remote Control board
1x RCB-BB RS232 cable
1x USB cable
2x 2.4GHz antenna
4x AAA battery
1x Quick Start Guide
2 Simple range measurement
The pre-flashed performance test application on the RCB128RFA1 radio controller
boards features a simple range measurement. Each board operates in a
standalone manner, and is able to transmit or receive data frames. A successful
transmit or receive operation is indicated by a blinking LED.
8-bit Atmel
Microcontrollers
Application Note
Rev. 8368B-AVR-01/12
