Atmel DataFlash AT45DB321 Operation Download | Manualshive

Page: 21 / 21

background image

© Atmel Corporation 2001.

Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company’s standard war-
ranty which is detailed in Atmel’s Terms and Conditions located on the Company’s web site. The Company assumes no responsibility for
any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without
notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual prop-
erty of Atmel are granted by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel’s products are
not authorized for use as critical components in life suppor t devices or systems.

Atmel Headquarters

Atmel Operations

Corporate Headquarters

2325 Orchard Parkway
San Jose, CA 95131
TEL (408) 441-0311
FAX (408) 487-2600

Europe

Atmel SarL
Route des Arsenaux 41
Casa Postale 80
CH-1705 Fribourg
Switzerland
TEL (41) 26-426-5555
FAX (41) 26-426-5500

Asia

Atmel Asia, Ltd.
Room 1219
Chinachem Golden Plaza
77 Mody Road Tsimhatsui
East Kowloon
Hong Kong
TEL (852) 2721-9778
FAX (852) 2722-1369

Japan

Atmel Japan K.K.
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
TEL (81) 3-3523-3551
FAX (81) 3-3523-7581

Atmel Colorado Springs

1150 E. Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906
TEL (719) 576-3300
FAX (719) 540-1759

Atmel Rousset

Zone Industrielle
13106 Rousset Cedex
France
TEL (33) 4-4253-6000
FAX (33) 4-4253-6001

Atmel Smart Card ICs

Scottish Enterprise Technology Park
East Kilbride, Scotland G75 0QR
TEL (44) 1355-357-000
FAX (44) 1355-242-743

Atmel Grenoble

Avenue de Rochepleine
BP 123
38521 Saint-Egreve Cedex
France
TEL (33) 4-7658-3000
FAX (33) 4-7658-3480

Fax-on-Demand

North America:
1-(800) 292-8635

International:
1-(408) 441-0732

e-mail

literature@atmel.com

Web Site

http://www.atmel.com

BBS

1-(408) 436-4309

Printed on recycled paper.

1121E–01/01/xM

Marks bearing

®

and/or

™

are registered trademarks and trademarks of Atmel Corporation.

Terms and product names in this document may be trademarks of others.

«
...
19
20
21

Summary of Contents for DataFlash AT45DB321






















Reviews:

No comments

Related manuals for DataFlash AT45DB321

Brand: Bahco Pages: 4

Brand: U-Line Pages: 3

Brand: Husky Pages: 4

Brand: Morrow Pages: 46

Brand: IBM Pages: 18

Brand: Keter Pages: 76

Brand: Hama Pages: 8

Brand: kincrome Pages: 2

Brand: Duratuf Pages: 17

Brand: iStorage Pages: 23

Brand: Infrant Technologies Pages: 2

Brand: Infrant Technologies Pages: 8

Brand: Kreg Pages: 18

Brand: SATA Pages: 8

Brand: QNAP Pages: 49

Brand: Seagate Pages: 86

Brand: Quantum Pages: 4

SuperLoader 3A Series

Brand: Quantum Pages: 121

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands