11
Fig. 3.
Cable holder
Cable clip
Front pad
Headlamp connection
4
5
6
7
Fig. 4. Connection of LED light battery
• Take one of the enclosed connecting cables and join it to the ATMOS HL 21 LED
headlamp connection (
7
, Fig. 3).
• Use the short connecting cable if you want to carry the LED battery on the
headband (Fig. 8, page 13).
• Use the long connecting cable if you want to carry the LED battery in your coat
pocket, in your trouser pocket, or on your belt. This cable is also to be used if the
headlamp is to be supplied from an ATMOS power source. If necessary, lead the
cable under the front pad and through the cable holders in the joint of the headlamp
ATMOS HL 21 LED.
• Use the enclosed cable clip (
5
, Fig. 3) to fix the long cable to your clothes.
• Join the other end of the connecting cable with the socket on the rechargeable LED
battery (Fig. 4) or with the power source in your ATMOS ENT treatment unit.
•
Note: By means of its rear cable clip, the rechargeable LED battery can be fixed to
your coat pocket, to your belt, or to the battery holder on the headlamp ATMOS HL
21 LED.
3.0 Setting up and starting up
