12
3.3 Functionality of the rechargeable LED battery
3.3.1 Capacity indication
Charging of the LED battery must be checked regularly, as the light goes out very
quickly when the battery goes flat. We recommend changing or charging the battery
when the capacity is <50%.
• As long as the test button (
1
, Fig. 5) of the rechargeable LED battery is pressed,
the battery capacity is shown for approx. 3 seconds (
2
, Fig. 5, green LEDs for
levels 1...5).
3.3.2 Charging the LED battery
•
Use the primary adapter fitting your power supply (Euro/US/UK/Aus). See
information enclosed with the charging power pack.
• To charge the LED battery, disconnect it from the headlamp ATMOS HL 21 LED.
• Join the round connector of the power pack cable with the socket (
2
, Fig. 6) on the
LED battery.
• During the charging process, the current battery capacity is indicated (
2
, Fig. 5,
green LEDs for levels 1...5). The battery is fully charged when all 5 LEDs go out
again.
During charging, operation of the headlamp is impossible!
Fig. 6.
Connecting socket for headlamp
Charging socket on LED battery
1
2
Fig. 5.
Test button
Indication of the battery capacity
(green LED)
1
2
3.0 Setting up and starting up
