6
2.4 HOW TO CONNECT AUDIO CABLE INPUT:
You can also connect the speaker to Audio Cable line input using the
3.5mm Audio Cable (provided). Connect the line-out socket of your audio
source to the “AUDIO IN” jack on the speaker. Then press the “MODE”
button to switch between Bluetooth input and Audio Cable input, and
you will see the GREEN indicator light.
SECTION 3: TROUBLESHOOTING
Unable to connect the speaker to your Bluetooth device?
A. Check that the power of both the speaker and the Bluetooth-enabled
device is on.
B. Check that the speaker volume is not on mute (lowest volume setting).
C. Ensure the source device’s Bluetooth feature is activated.
D. Ensure the speaker is within a maximum of 98 feet (30 meters
)
from
the Bluetooth-enabled device, and there are no obstructions in
between, such as thick solid wall or other electronic devices, which
may cause shorter transmission or interference.
E. Check that no other device is already connected with the speaker.
F. Check that no other devices are attempting to pair with the speaker.
G.If all the above steps do not resolve the problem, please turn off the
speaker for several minutes and restart the Bluetooth connection
process again. However, interoperability between the speaker and
other Bluetooth-enabled products is not guaranteed because this
depends on compatibility.
H.If pairing the speaker with the AtmosFX Digital Decorating Kit Plus after
the speaker has been paired with other Bluetooth-enabled devices,
first power off the speaker for several minutes and then power on
again to restart pairing with the Digital Decorating Plus Kit.
I. If the Bluetooth connection with the Digital Decorating Kit Plus has
been interrupted, you will hear the pairing failure notification alert and
it will cut off automatically within 2.5 minutes; or you can turn off the
speaker and restart for new Bluetooth pairing.
J. For additional troubleshooting tips, visit https://support.atmosfx.com
