background image

8

drop compensator to the appropriate setting. This will automatically adjust your reticle for 
that particular distance. Your 4-12x also comes with other cams allowing you to change 
your bullet drop compensator to work with the following categories: .308, 30-. 06, .270, 
7 mm Mag, .300 Win Mag. 22-250, .243, .223. The 2-6x68 has the rounds for .223, .308, 
30-.06, .270, 7mm MAG, .300 Win Mag.

chANgINg ThE bullET DRop compENSAToR

Set the bullet drop compensator to the 100-yards (2-6x68) 
or 200 yards (4-12x80) range. Then remove the eleva-
tion dust cover. Next you will find three small set screws 
on the bullet drop compensator right above the yardage 
numbers. Remove these screws and lift the cam off of the 
scope. Once you have done this select the desired caliber 
cam you would like to use and place this cam where you 
removed the previous one (make sure that a replacement 
cam is set to the 100-yard range for 2-6x68 and 200 yards for 4-12x80). Then tighten the 
cam by putting the three set screws back. Finally place the dust back.

mAINTAININg YouR RIFlEScopE

Your riflescope is waterproof and shockproof. However, you should never try to take apart 

or clean it internally (it will void your warranty). If your scope ever does need any repair 
or adjustment, it should be returned to ATN’s service department. The exposed optical 
surfaces will perform their best if they are wiped clean from time to time with a lens cloth 
or with optical quality lens paper like those for eyeglasses or camera lenses. Maintain 
the metal surfaces of your rifle scope by removing any dirt or sand with a soft brush so as 
to avoid scratching the finish. Wipe down the scope with a damp cloth and follow with a 
dry cloth. Finally, going over the tube with a silicone treated cloth will restore luster and 
protect the scope against corrosion. Be careful not to touch the lenses with the silicone 
cloth.

ThE NIghT VISIoN EYEpIEcE

The Night Vision eyepiece utilizes a US 2nd + or 3rd Gen. Light 
Intensifying Tube. A separate, removable, most powerful in 
the industry (450mW), long-range Infrared Illuminator is also 
included to provide the user with total darkness capability. 
Furthermore the U.S. government just granted ATN with a 
patent for the feature that prevents Tube from being burnt out by 
the illuminated reticle.

200 yards

500 yards

1000 yards

500 yards 

compensation

200 yards 

compensation

1000 yards 

compensation

Summary of Contents for 2-6x68 DNS

















Reviews: